# Config file for Conexant AccessRunner  
 
# Driver mode  
DRIVER_MODE=3  
# 1 = normal, 2 = debug, 3 = normal+max speed (without ask adsl status), 4 = debug+max speed (without ask adsl status)  
 
# Protocol  
PROTOCOL_MODE=4  
# 1 = RFC1483/2684 routed, 2 = PPP over ATM (pppoa), 3 = RFC1483/2684 bridged, 4 = PPP over Ethernet (pppoe)  
 
# Paths  
BINARY_PATH="/usr/sbin"  
ATM_PATH=""  
 
# ADSL  
# if OPEN_MODE is blank then cxload uses default mode acoording VID & PID  
# Values for OPEN_MODE are:  
# 0 = auto selection, G.Handshake  
# 1 = auto selection, T1.413  
# 2 = G.Handshake  
# 3 = ANSI T1.413  
# 4 = ITU-T G.992.1 (G.DMT)  
# 5 = ITU-T G.992.2 (G.LITE)  
OPEN_MODE=4  
 
# ATM  
VPI=1  
VCI=55